info@actionpropertygroup.com 07502999058 East Sussex, Eastbourne, UK

Blog

  • Home
  • EICR Certificate Comparison: What Matters
EICR Certificate Comparison: What Matters
7 Nov 2026 No Comments Uncategorized

EICR Certificate Comparison: What Matters

A low EICR quote can look attractive until the report arrives with vague limitations, missing test schedules or a remedial price that bears little relation to the original visit. An effective EICR certificate comparison is not simply about choosing the cheapest inspection. It is about checking that each contractor is pricing the same scope, producing a usable report and giving you clear next steps if faults are found.

For landlords, letting agents and property managers, this matters because electrical compliance can hold up a tenancy, handover or inspection. A report that is complete, correctly coded and easy to act on gives you a reliable record of the installation’s condition. A poor one can create avoidable cost, confusion and further appointments.

First, understand what you are comparing

An EICR is an Electrical Installation Condition Report. It records the condition of a property’s fixed electrical installation, including items such as consumer units, circuits, sockets, switches, fixed wiring and earthing arrangements. It is often called an EICR certificate, but the distinction is useful: an EICR is a condition report, not a certificate for newly completed installation work.

For a new electrical installation or a significant alteration, an Electrical Installation Certificate may be required instead. Portable appliance testing is separate again. A PAT label on a kettle or microwave does not demonstrate that the fixed wiring in a rental property has been inspected.

When comparing providers, make sure every quote relates to the same service. One price may cover an EICR for a one-bedroom flat with a single consumer unit; another may assume additional circuits, outbuildings, communal areas or commercial equipment. Those are not like-for-like prices.

What a proper EICR should include

A useful report should identify the address and installation, the extent of the inspection, any agreed limitations, inspection observations, test results, circuit details and the recommended date for the next inspection. It should also make clear whether the installation has been assessed as satisfactory or unsatisfactory.

Limitations deserve close attention. Sometimes they are reasonable. For example, a locked storage area may be inaccessible at the time of testing, or concealed wiring cannot be visually inspected without opening up finishes. However, a long list of unexplained limitations can reduce the value of the report. If substantial parts of an installation have not been inspected or tested, ask how that affects the outcome and what access will be needed to complete the work.

The observation codes are equally important. A C1 observation indicates danger is present and urgent action is required. C2 means potentially dangerous and requires improvement, while FI means further investigation is needed without delay. C3 observations are recommendations for improvement and do not, on their own, make a report unsatisfactory.

A comparison should therefore look beyond the overall result. Two unsatisfactory reports can require very different responses. One may need a straightforward replacement of damaged accessories; another may point to faults in the earthing arrangement, overloaded circuits or a consumer unit requiring more substantial work.

Comparing EICR quotes fairly

Before accepting a quote, confirm what is included rather than relying on a headline figure. A clear quotation should state the property type, number of consumer units or distribution boards, expected number of circuits, access assumptions and whether the price includes the full report after testing.

Ask whether there is an extra charge for circuits above an allowance, parking, tenant no-access visits, outbuildings or communal supplies. This is particularly relevant for converted buildings, houses in multiple occupation and mixed-use premises, where electrical arrangements can be more complex than they first appear.

It is also worth checking who will undertake the inspection and whether they are suitably qualified and competent to carry out inspection and testing. The report should be completed by the person responsible for the inspection, with clear details of their qualifications or registration where applicable. A contractor that can explain its process before attending is more likely to provide a report that stands up to scrutiny afterwards.

The lowest price is not always poor value, and the highest price is not automatically better. It depends on the property, the information supplied and whether the contractor has allowed enough time to test properly. A rushed inspection may appear economical but can lead to incomplete information, repeat visits and uncertainty over remedial work.

Check the proposed inspection scope

A practical comparison starts with the property details. Give each contractor the same information: property type, number of bedrooms, known consumer units, outbuildings, recent alterations, occupancy status and any previous EICR. If the property is vacant, say so. Vacant access can make testing more efficient, while occupied homes often require appointments to be carefully managed around tenants.

For blocks and commercial properties, establish whether the quote covers only a demised unit or includes landlord supplies and communal areas. Emergency lighting, fire alarm systems and other specialist systems may require separate inspection arrangements. Assuming they are included can leave a gap in your compliance plan.

Compare remedial recommendations, not just remedial prices

Where an EICR is unsatisfactory, the next decision is usually remedial work. This is where a detailed report makes a major difference. The remedial quotation should link each item back to a report observation so you can see exactly why the work is recommended.

Be cautious where remedial work is priced as a single unexplained figure. A clear quote should distinguish urgent safety work from recommended upgrades and set out any assumptions. If a consumer unit replacement is suggested, for example, ask whether the price includes testing, certification, labelling, making good and any necessary notification.

There can be more than one compliant way to address an issue. Replacing a damaged accessory may be sufficient in one case, while repeated faults on ageing circuits may justify broader work. The right approach depends on the condition of the installation, the building’s use, tenant safety and the long-term maintenance plan. A contractor should be able to explain the options without applying pressure for unnecessary work.

After remedial works are complete, obtain written confirmation that the required work has been carried out and the installation is safe. Depending on the work completed, this may include a Minor Electrical Installation Works Certificate, an Electrical Installation Certificate or a new satisfactory EICR. Keep the documents with the property’s compliance records.

Do not confuse the report date with a fixed expiry date

For private rented homes in England, landlords must ensure electrical installations are inspected and tested by a qualified and competent person at intervals of no more than five years, or sooner if the report recommends it. A report may specify a shorter interval because of the installation’s condition or the nature of the property.

Landlords must also provide a copy of the report to existing tenants within 28 days of the inspection, to new tenants before they occupy the property, and to the local authority within seven days if requested. Where remedial work is required, it must generally be completed within 28 days, or sooner if the report specifies, with written confirmation provided to the relevant parties.

For managing agents and portfolio landlords, the useful question is not simply, “When does this expire?” It is, “What action is required now, what evidence is needed, and when must the next inspection be booked?” That approach prevents compliance dates from becoming last-minute emergencies.

A better way to choose an EICR provider

Choose a provider that makes the process clear from the outset: confirm the scope, arrange access, carry out the inspection, issue the report promptly and provide a transparent remedial quotation if needed. This keeps the decision-making trail clean for landlords, agents and housing teams.

Action Property Group supports property stakeholders across East Sussex with electrical testing, remedial works and wider maintenance requirements, helping reduce the need to coordinate separate contractors when a property needs attention before reoccupation or inspection.

The best EICR is not the one with the shortest form or the lowest initial price. It is the one that gives you an accurate picture of the installation, a proportionate plan for any faults and records you can rely on when the property needs to be safe, compliant and ready for occupation.

Share:

No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *